Flue Gas Desulfurization by Using Calcined Dolomite

Baslayici, S.; BUĞDAYCI, Mehmet; Turan, A.; Oncel, L.; Acma, E.

doi:10.1088/1757-899X/614/1/012015

Flue Gas Desulfurization by Using Calcined Dolomite

Yazarlar (5)

S. Baslayici İstanbul Teknik Üniversitesi, Türkiye

Doç. Dr. Mehmet BUĞDAYCI Yalova Üniversitesi, Türkiye

A. Turan Yalova Üniversitesi, Türkiye

L. Oncel Sinop Üniversitesi, Türkiye

E. Acma İstanbul Teknik Üniversitesi, Türkiye

Makale Türü	Özgün Makale (SCOPUS dergilerinde yayınlanan tam makale)
Dergi Adı	IOP Conference Series: Materials Science and Engineering
Dergi ISSN	1757-8981
Dergi Tarandığı Indeksler	scopus
Makale Dili	İngilizce	Basım Tarihi	09-2019
Cilt / Sayı / Sayfa	614 / 1 / 12015–	DOI	10.1088/1757-899X/614/1/012015
Makale Linki	https://iopscience.iop.org/article/10.1088/1757-899X/614/1/012015

Özet

SO2 emissions has begun to cause serious problems in industrialized countries. Today, various methods are used for removal of SO2 gas. SO2 gas is an important raw material for production of sulfuric acid. However, SO2 content of flue gas must be over 6% to produce sulfuric acid commercially. Flue gases, which don't have enough amount of SO2 to produce sulfuric acid commercially are harmful to the environment and human health and they must be filtered. In this study, calcined dolomite was used to remove SO2 in flue gas which doesn't have enough SO2 to produce sulfuric acid but have high emission values. Pyrite was used as SO2 source and SO2 removal efficiency of dolomite was determined for different experimental parameters. SO2 capturing system was thermodynamically modeled and SO2 capturing efficiency was determined as 77.81% in the experiments.

Anahtar Kelimeler

BM Sürdürülebilir Kalkınma Amaçları

Atıf Sayıları
SCOPUS	3
Google Scholar	2

Flue Gas Desulfurization by Using Calcined Dolomite

Flue Gas Desulfurization by Using Calcined Dolomite

Paylaş