Exploring photocatalytic tetracycline removal performance under simulated sunlight irradiation: Milling time effect on metallic reduction of MnO/ZrO2 mixed oxide
Yazarlar (3)
Arş. Gör. Dr. Nergiz Zeynep KANMAZ KELEŞOĞLU Yalova Üniversitesi, Türkiye
Doç. Dr. Mehmet BUĞDAYCI Yalova Üniversitesi, Türkiye
Prof. Dr. Pelin BARAN Yalova Üniversitesi, Türkiye
Makale Türü Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı Ceramics International (Q1)
Dergi ISSN 0272-8842 Dergi Bilgileri (2024)
Dergi Tarandığı Indeksler SCI-Expanded
Makale Dili Türkçe Basım Tarihi 09-2024
Kabul Tarihi – Yayınlanma Tarihi 01-11-2024
Cilt / Sayı / Sayfa 50 / 21 / 44598–44608 DOI 10.1016/j.ceramint.2024.08.308
Makale Linki http://dx.doi.org/10.1016/j.ceramint.2024.08.308
UAK Araştırma Alanları
Ayırma İşlemleri
Özet
In the present research, it is reported that ball milling technique can be applied to enhance the photocatalytic properties of MnO and ZrO2 metal oxide powders (MZOx) furthermore the fabricated photocatalyst can be used for the degradation of tetracycline (TTC). XRD analyses revealed that increasing the milling time resulted in the formation of a pure metallic Mn crystal phase, which boosted the antibiotic degradation rate. It was confirmed by SEM technique that the morphological structures of the particles were generally small and uniform. The band gap energy was calculated as 3.70 eV for the hybrid metal oxide. Additionally, the adsorptive and photoluminescence features were illuminated via DRS and PL analyses. The effect of milling time had a major impact on the photodegradation rate of TTC, and the 8 h milling sample (MZOx-8h) exhibited the highest catalytic degradation activity (79.4 %). Low photocatalytic activity was obtained at acidic pHs and increased at alkaline pHs. The presence of H2O2 sharply decreased photocatalytic process time (60 min) and 94.3 % of the TTC was degraded at 7.5 mM H2O2. The photocatalytic degradation process proceeded through superoxide radicals and was supported by holes. The stability of MZOx-8h almost remained constant (70.02 %) even after seven cycles. It was determined that the presence of oxalic acid positively affected the progress of TTC degradation reactions. Further, practical application areas were investigated and MZOx-8h doped on support materials was found to be suitable for such applications in proportion to the doping ratio. Finally, it was demonstrated that MZOx-8h exhibited remarkable performance in photocatalytic reactions of different types of organic pollutants. The synergistic nature of MnO and ZrO2 with the contribution of ball milling time effect resulted in high photocatalytic activity.
Anahtar Kelimeler
Ball-milling | Metal oxide | Photocatalysis | Tetracycline | Visible light
Science Direct
BM Sürdürülebilir Kalkınma Amaçları
Atıf Sayıları
Web of Science 12
Scopus 11
Exploring photocatalytic tetracycline removal performance under simulated sunlight irradiation: Milling time effect on metallic reduction of MnO/ZrO2 mixed oxide
İletişim
  • Yalova Üniversitesi Rektörlüğü, Bahçelievler Mah. Çınarcık Yolu Caddesi No: 26 Merkez - YALOVA, 77200
  • unis@yalova.edu.tr 0226 815 50 00
Sosyal Media
Talentsoft Yazılım Talent Yazılım
Tasarım ve Programlama #2025