Determination of Screw Holding Strength of Some Wood Materials
Yazarlar (4)
Doç. Dr. Kubulay ÇAĞATAY Incirli Tekn & Endustri Meslek Lisesi, Türkiye
Hasan Efe Gazi University, Türkiye
Erol Burdurlu
Gazi University, Türkiye
Gazi University, Türkiye
H. Ismail Kesik Kastamonu University, Türkiye
| Makale Türü | Özgün Makale (ESCI dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY | ||
| Dergi ISSN | 1303-2399 Wos Dergi | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2012 |
| Cilt / Sayı / Sayfa | 12 / 2 / 321–328 | DOI | – |
| Makale Linki | https://publons.com/publon/21925733/ | ||
| Özet |
| In this study, the screw holding strength of wooden materials obtained from Oriental beech (Fagus orientalis Lipsky), Scotch pine (Pinus sylvestris L.), Oak (Quercus borealis Lipsky), Chestnut (Castanea sativa) and Walnuts (Junglans regia) in the radial, tangential and longitudinal directions were researched. A total of 300 specimens that included 5 wood species, 3 different sectional direction, 2 types of fastenings, and 10 replications for each group were prepared and applied withdrawal test under static loading. As a result of the tests, the highest of the screw holding value was obtained in walnut wood, the lowest value was obtained in chestnut wood. As the specific gravity of wood materialsis being increased, the screw holding strength increased. In general, the radial direction have a higher screw holding strength compared to the tangential and longitudinal directions and the tangential directions have a higher screw holding strength compared to the longitudinal directions. |
| Anahtar Kelimeler |
| Wood material | cross-sectional | screw holding strength |
