Flue Gas Desulfurization by Using Calcined Dolomite

Baslayici, S.; BUĞDAYCI, Mehmet; Turan, A.; Oncel, L.; Acma, E.

doi:10.1088/1757-899X/614/1/012015

Flue Gas Desulfurization by Using Calcined Dolomite

Yazarlar (5)

S. Baslayici İstanbul Teknik Üniversitesi, Türkiye

Doç. Dr. Mehmet BUĞDAYCI Yalova Üniversitesi, Türkiye

A. Turan
Yalova Üniversitesi, Türkiye

L. Oncel Sinop Üniversitesi, Türkiye

E. Acma
İstanbul Teknik Üniversitesi, Türkiye

Bildiri Türü	Tebliğ/Bildiri	Bildiri Dili	İngilizce
Bildiri Alt Türü	Tam Metin Olarak Yayınlanan Tebliğ (Uluslararası Kongre/Sempozyum)
Bildiri Niteliği
DOI Numarası	10.1088/1757-899X/614/1/012015
Kongre Adı	Iop Conference Series Materials Science and Engineering
Kongre Tarihi	/
Basıldığı Ülke		Basıldığı Şehir
UAK Araştırma Alanları

Özet

SO2 emissions has begun to cause serious problems in industrialized countries. Today, various methods are used for removal of SO2 gas. SO2 gas is an important raw material for production of sulfuric acid. However, SO2 content of flue gas must be over 6% to produce sulfuric acid commercially. Flue gases, which don't have enough amount of SO2 to produce sulfuric acid commercially are harmful to the environment and human health and they must be filtered. In this study, calcined dolomite was used to remove SO2 in flue gas which doesn't have enough SO2 to produce sulfuric acid but have high emission values. Pyrite was used as SO2 source and SO2 removal efficiency of dolomite was determined for different experimental parameters. SO2 capturing system was thermodynamically modeled and SO2 capturing efficiency was determined as 77.81% in the experiments.

Anahtar Kelimeler

Pdf İndir

BM Sürdürülebilir Kalkınma Amaçları

Atıf Sayıları
Scopus	3

Flue Gas Desulfurization by Using Calcined Dolomite

Flue Gas Desulfurization by Using Calcined Dolomite

Paylaş