Characterization of Ti4Al4Mo/SiC composite produced by pressure-assisted sintering
Yazarlar (7)
R. Yamanoglu
Kocaeli Üniversitesi, Türkiye
Kocaeli Üniversitesi, Türkiye
A. Bahador
Razak Faculty of Technology And Informatics, Malezya
Razak Faculty of Technology And Informatics, Malezya
K. Kondoh
Joining And Welding Research Institute, Japonya
Joining And Welding Research Institute, Japonya
C. Duran
Kocaeli Üniversitesi, Türkiye
Kocaeli Üniversitesi, Türkiye
Y. Akyildiz
Kocaeli Üniversitesi, Türkiye
Kocaeli Üniversitesi, Türkiye
Öğr. Gör. Yahya ÖZDEMİR Yalova Üniversitesi, Türkiye
O. Ozturk
Onatus Vision Technologies, Türkiye
Onatus Vision Technologies, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Bulletin of Materials Science (Q3) | ||
| Dergi ISSN | 0250-4707 Dergi Bilgileri (2023) | ||
| Makale Dili | İngilizce | Basım Tarihi | 06-2023 |
| Cilt / Sayı / Sayfa | 46 / 2 / – | DOI | 10.1007/s12034-023-02947-x |
| UAK Araştırma Alanları |
|
||
| Özet |
| In this study, a SiC-reinforced Ti4Al4Mo alloy matrix composite was designed, and produced by pressure-assisted sintering technique. Ti-4Al-4Mo (wt%) alloy was prepared from elemental powders, and different fractions of SiC (1, 5 and 10 wt%) ceramic reinforcements were homogenously distributed in the matrix by mechanical mixing and the mixtures were consolidated under 45 MPa pressure and sintered at 950°C for 10 min. Microstructure of Ti alloy matrix was studied and correlated with the CALPHAD approach. Results showed that 10 wt% SiC content caused an agglomeration of reinforcement particles and affected the properties negatively. However, hardness of the composites increased with increase in SiC content, and excellent wear properties were obtained at 1 and 5 wt% SiC content. Further increase in SiC content lead to a decrease in bending and wear properties. This study provides a new Ti4Al4Mo metal–matrix composite reinforced with SiC particles. |
| Anahtar Kelimeler |
| composite | powder metallurgy | SiC | Ti4Al4Mo | wear |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Web of Science | 1 |
| Scopus | 1 |