Preparation of porous polyester composites via emulsion templating Investigation of the morphological mechanical and thermal properties
Yazarlar (3)
Elif Berber
Yalova Üniversitesi, Türkiye
Yalova Üniversitesi, Türkiye
Funda Çira
Yalova Üniversitesi, Türkiye
Yalova Üniversitesi, Türkiye
Prof. Dr. Emine Hilal MERT Yalova Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Polymer Composites (Q2) | ||
| Dergi ISSN | 0272-8397 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 05-2016 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 28-11-2014 |
| Cilt / Sayı / Sayfa | 37 / 5 / 1531–1538 | DOI | 10.1002/pc.23323 |
| Makale Linki | http://doi.wiley.com/10.1002/pc.23323 | ||
| Özet |
| Open porous polyester composites were prepared by the crosslinking of unsaturated polyester resin and divinylbenzene in water‐in‐oil concentrated emulsion templates with the presence of a conventional surface modified montmorillonite nanoclay. Medium and high internal phase emulsions with either 55 or 80 wt% of internal phase were used as templates. The effect of monomer composition, emulsifier concentration, and internal phase amount on the emulsion stability and the morphology of the resulting porous composites were investigated. Moreover, the morphological properties of the resulting composites were determined depending on the amount of nanoclay loading. It was found that the morphological features, namely surface area and cell diameter, were altered dramatically with the amount of nanoclay loading. An important part of the research was focused on the variation of mechanical and thermal … |
| Anahtar Kelimeler |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Google Scholar | 23 |
| Scopus | 19 |