Effect of solution-blown polyamide-6 nanofiber interlayer on drilling performance of carbon fiber reinforced composites
Yazarlar (5)
Doç. Dr. Ali İmran AYTEN
Yalova Üniversitesi, Türkiye
Mehmet Şahbaz
Karamanoğlu Mehmetbey Üniversitesi, Türkiye
Sezer Morkavuk
Karamanoğlu Mehmetbey Üniversitesi, Türkiye
Yusuf Polat
Erzurum Teknik Üniversitesi, Türkiye
Aybeniz Seyhan
İstanbul Teknik Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Journal of Reinforced Plastics and Composites (Q3) | ||
| Dergi ISSN | 0731-6844 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 02-2026 |
| Cilt / Sayı / Sayfa | 45 / 0 / 1268–1283 | DOI | 10.1177/07316844251318859 |
| Makale Linki | https://doi.org/10.1177/07316844251318859 | ||
| Özet |
| This study examines the effect of solution-blown polyamide-6 (PA6) nanofiber interlayers on the drilling performance of carbon fiber reinforced polymer (CFRP) composites. Results demonstrate that PA6 nanofiber interlayers significantly reduce drilling thrust force and improve surface quality. Specifically, at a spindle speed of 1000 r/min and a feed rate of 1500 mm/min, the maximum thrust force was reduced by 17%, from 683.33 N in neat composites to 583.13 N in nanofiber-reinforced composites. At a higher spindle speed of 8000 r/min and a feed rate of 500 mm/min, thrust force decreased by 18%, from 80.22 N to 65.46 N. Surface roughness analysis revealed that nanofiber interlayers reduced Ra values by up to 44%, with a minimum roughness of 0.529 µm compared to 1.196 µm in neat composites. Optical and SEM analyses confirmed fewer plucking zones, reduced fiber pull-out, and improved fiber-matrix … |
| Anahtar Kelimeler |
| Carbon fiber reinforced composites | drilling | nanofiber | polyamide 6 | solution blowing |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| WoS | 1 |
| Google Scholar | 2 |