Effect of solution-blown nanofibrous web on quasi-static punch shear test results and quasi-static indentation behavior of carbon fiber-reinforced epoxy matrix composites
Yazarlar (4)
Doç. Dr. Ali İmran AYTEN
Yalova Üniversitesi, Türkiye
Yusuf Polat
Türkiye
Mehmet Şahbaz
Türkiye
Aybeniz Seyhan
Türkiye
| Makale Türü |
Özgün Makale
(SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
|
||
| Dergi Adı | Journal of Composite Materials (Q3) | ||
| Dergi ISSN | 1530-793X Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 09-2023 |
| Cilt / Sayı / Sayfa | 57 / 24 / 3865–3875 | DOI | 10.1177/00219983231197351 |
| Makale Linki | https://hdl.handle.net/11492/7938 | ||
| Özet |
| This study investigated the effects of the nanofiber interlayer in carbon fiber-reinforced epoxy matrix composites on quasi-static loading behaviors such as quasi-static punch shear (QS-PST), quasi-static indentation (QSI), and short-beam shear (SBS) loading. The solution-blowing technique was used to produce polyamide-6 (PA6) nanofiber with 1 g/m2 areal density. A 2×2 twill weave carbon fiber fabric with an areal density of 200 g/m2 was covered with solution-blown nanofibers. The vacuum-assisted resin transfer molding (VARTM) method was used to manufacture nanofiber interlayered composites and non-interlayered composites. QS-PS experiments were conducted at three different span to punch ratios (SPR), namely 1.1, 2, and 4. The PA6 nanofiber had a synergetic effect on the composite structure. In the QS-PST experiments, it increased the amount of work achieved by the specimen at rates of 29.5%, 13 … |
| Anahtar Kelimeler |
| Carbon fiber | nanofiber | polyamide-6 | solution-blowing method | quasi-static punch shear test | quasi-static indentation test |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| WoS | 3 |
| Google Scholar | 5 |