Lauric Acid Based Composite Phase Change Materials Form‐Stabilized with Highly Crosslinked Polymer for Thermal Energy Storage
Yazarlar (6)
Prof. Dr. Hatice Hande MERT Yalova Üniversitesi, Türkiye
Betül Şebnem Şimşiroğlu
Elif Nur Özer
Prof. Dr. Hülya Çelik Onar Türkiye
Prof. Dr. Fehime Jülide HIZAL YÜCESOY Yalova Üniversitesi, Türkiye
Prof. Dr. Mehmet Selçuk MERT Yalova Üniversitesi, Türkiye
Makale Türü Açık Erişim Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı Macromolecular Materials and Engineering (Q1)
Dergi ISSN 1438-7492 Dergi Bilgileri (2025)
Dergi Tarandığı Indeksler SCI-Expanded
Makale Dili Türkçe Basım Tarihi 05-2025
Kabul Tarihi – Yayınlanma Tarihi 12-05-2025
Cilt / Sayı / Sayfa 310 / 0 / – DOI 10.1002/mame.202500111
Makale Linki https://doi.org/10.1002/mame.202500111
UAK Araştırma Alanları
Analitik Kimya
Özet
AbstractLauric acid (LA)‐based composite phase change materials (PCMs) are prepared using a novel porous highly crosslinked polymer (HCP) framework synthesized from coumarin‐3‐carboxamide derived material via the Friedel‐Crafts alkylation method. The preparation process of the composite PCMs occurred in three consecutive steps: synthesis of coumarin‐3‐carboxamide derivative material from coumarin‐3‐carboxylic acid; synthesis of HCP as support material, and integration of LA into the support matrix through the solvent assisted vacuum absorption process. Form‐stabilization of LA with this method is rapid and easy, as well as not requiring extra purification and cleaning for composites compared to production by microencapsulation method. In addition, the advantage of HCP as a PCM support material is due to its appropriate pore morphology, and specific surface area (76.26 m2 g−1). The chemical structure and porous morphology of HCP matrix are detected by Fourier‐transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) analysis, respectively. According to the leakage test performed among the prepared composite PCMs, the LA/HCP‐6040 composite containing 60% LA‐40% HCP is determined as the composite with the highest ratio of PCM by mass without any leakage. The composite PCMs supported with HCP matrix displayed good thermal stability as a result of thermogravimetric analysis, in addition to thermal energy storage characteristics confirmed by thermal camera views.
Anahtar Kelimeler
Pdf İndir Creative Commons License
BM Sürdürülebilir Kalkınma Amaçları
Atıf Sayıları
Lauric Acid Based Composite Phase Change Materials Form‐Stabilized with Highly Crosslinked Polymer for Thermal Energy Storage

Paylaş

İletişim
  • Yalova Üniversitesi Rektörlüğü, Bahçelievler Mah. Çınarcık Yolu Caddesi No: 26 Merkez - YALOVA, 77200
  • unis@yalova.edu.tr 0226 815 50 00
Sosyal Media
Talentsoft Yazılım Talent Yazılım
Tasarım ve Programlama #2025