Development of composite phase change materials based on n-tetradecane and β-myrcene based foams for cold thermal energy storage applications
    
Yazarlar (4)
Doç. Dr. Hatice Hande MERT Yalova Üniversitesi, Türkiye
Doç. Dr. Burcu KEKEVİ Yalova Üniversitesi, Türkiye
Prof. Dr. Emine Hilal MERT Yalova Üniversitesi, Türkiye
Doç. Dr. Mehmet Selçuk MERT Yalova Üniversitesi, Türkiye
Makale Türü Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı Thermochimica Acta (Q2)
Dergi ISSN 0040-6031 Wos Dergi Scopus Dergi
Dergi Tarandığı Indeksler SCI-Expanded
Makale Dili İngilizce Basım Tarihi 01-2022
Cilt / Sayı / Sayfa 707 / 1 / 179116–0 DOI 10.1016/j.tca.2021.179116
Makale Linki http://dx.doi.org/10.1016/j.tca.2021.179116
Özet
β-myrcene based foam / n-tetradecane composite phase change materials (PCMs) were prepared for cold thermal energy storage systems. β-myrcene based foams were synthesized as PCM support material, while n-tetradecane was selected as organic phase change cold storage material due to its appropriate phase change temperature and high heat storage capacity for supplying temperature requirements of the food refrigeration, storage and transportation systems. The polymer foams were prepared in presence of different nanoclay particles by using β-myrcene as bio-based monomer and ethylene glycol dimethacrylate as crosslinker. The form-stable composite PCMs were obtained via impregnation of n-tetradecane into the porous frameworks in one-step. Based on the results, the highest latent heat was measured as 82.14 J/g for form-stable composite PCM, which has framework with higher cavity diameters besides to higher surface area, while the melting and crystallization temperatures determined as 4.37 °C and 1.73 °C.
Anahtar Kelimeler
Energy storage | n-Tetradecane, β-Myrcene | Phase change material | polyHIPE | Porous support