Nickel‐coated carbon fillers for polyurethane foam with improved microwave absorption performance: A comparative analysis
     
Yazarlar (3)
Gokce Kurt Yalova Üniversitesi, Türkiye
Mehmet Korkmaz Aksaray Üniversitesi, Türkiye
Doç. Dr. Alper KAŞGÖZ Yalova Üniversitesi, Türkiye
Makale Türü Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı Polymer Engineering and Science (Q2)
Dergi ISSN 0032-3888 Wos Dergi Scopus Dergi
Dergi Tarandığı Indeksler SCI-Expanded
Makale Dili İngilizce Basım Tarihi 02-2024
Cilt / Sayı / Sayfa 64 / 2 / 626–640 DOI 10.1002/pen.26572
Makale Linki https://doi.org/10.1002/pen.26572
Özet
In this study, polyurethane foam (PUF) composites were prepared by incorporating different functional fillers, and morphological, rheological, dielectric, and microwave absorption properties of these composite samples were investigated. Graphite (G), nickel (Ni), nickel-coated hybrid carbon (NiC), and iron II-III oxide (Fe3O4) powders were used as functional fillers, while rigid polyurethane foam (PUF) with a 40 kg/m3 density and a closed-cell structure was used as the carrier foam phase. Morphological analyses that were carried out by scanning electron microscopy showed that all fillers were dispersed between the cell walls. In dielectric characterization, the highest electrical permittivity values were obtained by incorporation of G, while the highest magnetic permeability values were obtained by incorporation of Fe3O4 at the same filler concentration. Furthermore, the PUF composites could be prepared using NiC at a higher filler concentration than the others due to the lower viscosity increasing effect of NiC. The highest microwave absorption performance was obtained in the NiC-filled PUF composite at a filler concentration of 120 phr. The minimum reflection loss (RL) value of −45.2 dB at 10.62 GHz and an RL value lower than −10 dB in the entire X-band region were obtained in the NiC-filled PUF composite. Highlights: Nickel-coated carbon (NiC) filled polyurethane foam (PUF) was prepared. The absorption performance of NiC was compared to conventional filler. PUF composites containing NiC showed lower viscosity and processability. The highest absorption could be obtained by NiC compared to conventional fillers.
Anahtar Kelimeler
dielectric properties | foams | polyurethanes | rheology
BM Sürdürülebilir Kalkınma Amaçları
Atıf Sayıları
WoS 1
SCOPUS 1
Google Scholar 1
Nickel‐coated carbon fillers for polyurethane foam with improved microwave absorption performance: A comparative analysis

Paylaş

İletişim
  • Yalova Üniversitesi Rektörlüğü, Bahçelievler Mah. Çınarcık Yolu Caddesi No: 26 Merkez - YALOVA, 77200
  • unis@yalova.edu.tr 0226 815 50 00
Sosyal Media
Talentsoft Yazılım Talent Yazılım
Tasarım ve Programlama #2025